Connection Performance for Ezviz C6N WiFi Camera

Ezviz C6N can connect through Wi-Fi or a wired LAN connection. For wireless setup, keep the camera, router, and phone reasonably close together while adding the camera in the EZVIZ app. The original connection test also found that signal strength dropped when the camera was moved farther from the router.

[reference] Title: Wireless Connection Text: Ezviz C6N uses 2.4 GHz Wi-Fi for its wireless network connection. Title: Wired Connection Text: The camera also includes an RJ45 Ethernet port for a wired network connection. Title: Setup Label Text: The QR code on the camera label is used when adding the camera through the EZVIZ app. [/reference]

The current C6N specifications confirm 2.4 GHz Wi-Fi and an RJ45 Ethernet interface, so either connection method can be selected according to the installation location and available network connection.

Power and Network Connection

EZVIZ-C6N IP Camera-LAN & micro-USB Ports

Connect the camera to power using its supplied power connection. After startup, a blinking blue indicator can be used as a setup-readiness cue when the camera is in configuration mode.

[checklist] * Camera is connected to power * Wi-Fi router is available for wireless setup * Camera is positioned near the router during initial configuration * Phone is connected to the intended home Wi-Fi network * EZVIZ app is ready and an account is available * QR code label on the camera is accessible [/checklist]

Wi-Fi Setup in the App

For the wireless connection used in the original test, the EZVIZ app was opened on a smartphone and an account was created before adding the camera. The app then provides the device-addition flow used to connect the C6N to the network.

EZVIZ-App- on smartphone

EZVIZ-App- Setting

EZVIZ-App- Setting-1

[step] 1. Connect the Ezviz C6N to power and allow it to start 2. Confirm that the camera is ready for configuration 3. Open the EZVIZ app and sign in or create an account 4. Start the add-device flow in the app 5. Scan the QR code on the camera label 6. Follow the in-app connection steps for the selected Wi-Fi network 7. Allow the camera to complete configuration before changing its position [/step]

Current EZVIZ guidance for adding a camera also uses the QR code on the device label and then continues with the app-guided Wi-Fi configuration process.

After the Camera Is Added

Once the camera is connected and added to the account, the app becomes the main place for accessing the camera and its available controls. The original setup flow included the camera home screen, pan-and-tilt viewing controls, and the video library.

EZVIZ-App- Home screen-1

EZVIZ-App- 360 degree capture from the app

EZVIZ-App- Video Library

Wi-Fi Placement

Wireless connection quality depends on the camera's placement relative to the router and the surrounding network environment. During the original test, the app did not show a full Wi-Fi signal at a distance of about 15 feet, so initial setup is better performed with the camera closer to the router.

[tip] Complete the first wireless configuration near the Wi-Fi router. After the camera is connected, move it to the intended location and check the connection again before treating that position as final. [/tip]

Wi-Fi or LAN

[compare] Wi-Fi | Convenient when the camera needs flexible placement and a suitable 2.4 GHz wireless signal is available. LAN | Uses the camera's Ethernet connection and can be considered when a wired connection to the router is practical. [/compare]

The C6N supports both wireless and Ethernet networking, so the preferred connection can depend on where the camera will be placed and whether a network cable can reach that location.

Connection Check

  • Confirm that the camera remains powered after setup.
  • Check that the camera appears in the EZVIZ app after configuration.
  • For Wi-Fi use, verify the connection again after moving the camera away from the router.
  • If wireless reception becomes noticeably weaker at the final location, try a closer or less obstructed position.
  • If Ethernet is preferred, the C6N provides an RJ45 network interface for a wired connection.
[note] Wireless signal strength can change with distance, walls, router placement, and the surrounding network environment. A location that works well during setup should still be checked again after the camera is placed in its normal position. [/note]

Note :

"Connection Performance for Ezviz C6N WiFi Camera"

This content is uploaded by APP SETUP DEVELOPER and available on Google Play Store. APP SETUP DEVELOPER do not own this content and this content credits to their respective owners listed in the source link. Hopefully useful and share this app.

Design and Coded by www.idblanter.com www.blantertheme.com www.blantermedia.com (Rio Ilham Hadi) 08888905441